PROTECTiQ PRO by RIMiQ | Bring your damaged rims back 2 life

Have scratches or dents tarnished your rims and self-esteem? Salvage both with the top player in wheel defense – PROTECTiQ PRO by RIMiQ – a user-friendly, superior safeguard for your car.

When the curb jumps out, you require a protector… a sentinel. 

PROTECTiQ PRO by RIMiQ… Your rim’s latest defender.

Uncover the most intelligent way to guard your wheels, with the proud stamp of “Made in the USA” and supported by a lifelong warranty. Ideal for city-travelers, weekend explorers, or car enthusiasts, PROTECTiQ PRO by RIMiQ is your passport to a stress-free commute.

Tirelessly refining and stretching the boundaries of cutting-edge technology, we are proud to present PROTECTiQ PRO by RIMiQ.

• Exclusive Blueprint | Install effortlessly on every wheel, scratched or pristine. Clean your wheels and add the trim for guaranteed, lifelong shelter.
• Reinforced 3M Tape Tech | Working jointly with 3M assures a resilient and long-lasting bond for extended protection.
• Customized Look | Flawlessly integrates with your wheels, forming an almost invisible barrier against curb scratches. Bold color choices available for a unique appearance.
• Fits Up to 24” Wheels | No need for measurement with a simple cut to fit.
• Creativity & Expertise | Fashioned by RIMiQ, PROTECTiQ PRO is the result of more than fourteen years of leading industry innovation.
• Lifelong Warranty | Cruise with assurance, knowing your investment is guarded by a market-leading lifelong warranty.

Defend your rims from scuffs and scratches with the world’s most robust, advanced rim protector.

• Rigid, OEM grade material
• Six color options for personalized appearance
• Universal Fit – no requirement for measuring or tools
• Unique 3M tape, extensive testing approved
• 26′ of material fitting up to four 24” wheels
• 3/8” robust trim, made in USA
• SEMA Award Winning Patented Blueprint

PROTECTiQ PRO by RIMiQ is the finest protective system against wheel rim damage caused by curb strikes while parking.

PROTECTiQ PRO by RIMiQ is the unparalleled protective system against wheel rim damage caused by curb strikes while parking.

PROTECTiQ PRO by RIMiQ is also a fantastic way to customize and enhance the look of your vehicle with 6 colors available: Red, Blue, Yellow, Silver, Black, and White.

• PROTECTiQ PRO Rim Protector
• 3M Automotive Grade Tape pre-applied to PROTECTiQ PRO
• 4 PROTECTiQ PRO clear joining strips
• 4 PROTECTiQ PRO Cleaning Wipes
• RIMiQ Lanyard
• PROTECTiQ PRO Warranty Card

We strongly recommend watching our step by step video for a thorough installation guide.

Initial Prep

Cleaning the wheels with soap and water is a great first step, although not necessary. Rubbing alcohol is your final cleaning step. Pro Tip (most wheels do not require this): If your wheels have substantial curb rash, you can briefly sand down the rough spots to yield a smooth surface. A flat surface is ideal for the tape. Thoroughly clean any sanded areas.

1. Clean the surface of your wheel with rubbing alcohol (70% or higher isopropyl) and a rag. Use additional rubbing alcohol until no dirt is transferring to your rag. Allow the wheel to dry (3-5 minutes). Pro Tip: Cut a small piece of the starting edge of the trim to a straight, clean cut. This allows a clean, flush joint where the ends meet each other.

2. Peel a small section of the red 3M release liner, yielding the black underside. Pro Tip: The tape has an extremely high initial tack. Once initially stuck to the wheel, we do not recommend repositioning.

3. Choose a starting section of the wheel (the flattest part) and start by precisely applying the tape. Use the top arch of the “L” shape PROTECTiQ PRO to assist in applying a smooth arch around the wheel. Pro Tip: Peel only a small section of tape at a time to allow for a precise, smooth arch.

4. Continue applying the trim all the way around the rim. Be sure to go back over applied sections with ample pressure. This is very important. Pro Tip: During the final third of the installation, precisely measure and cut about an inch long overhang of the trim (with the release liner still attached). This makes the final cutting step much easier.

5. Leave the release liner attached to the final 5 inches for the finishing cut. This allows the installer to dry fit the very last edge of the trim. Precisely measure and cut the exact amount of trim needed. Peel the remaining liner off and firmly apply the finishing edge. Pro Tip: Error on the side of not cutting enough trim off for a tighter gap where the ends meet. You can always cut more off if necessary.

6. Re-apply pressure over the entire trim, confirming the tape is secure. Add one clear gap strip to the joining edge. There are four small strips on the single clear sheet. Pro Tip: You are now the pro! Step back, admire your work and take lots of pictures. Please share with your friends and our team at Sales@RIMiQ.com.

PROTECTiQ PRO by RIMiQ are robustly engineered to offer an initial barrier to impacts of curbing and driving over potholes. 

More than fourteen years of ongoing product development have allowed us to manufacture the world’s leading wheel protection system, made from super tough mixed nylon composite with added UV stabilizer and impact modifier, to provide strength and durability in diverse climates. 

Our wheel protectors are made in the USA. The new exclusive profiles are developed with Vehicle OEM’s and boast a crisp finish and a robust 3M tape application to ensure a secure, long-lasting fit.

Wow! Thank you to our customers. Because of you, we created RIMiQ. 

Our amazing team has been developing premium, universal trim, made in the USA for over a decade. Honing our craft and perfecting each product. It’s what we love!

Years ago we filed a patent for a rim related product. Fast forward to 10s of thousands of orders, tons of customer feedback and lots of grueling hours with 3M. We started with a great product but because of the above, we have developed the world’s most advanced, quality driven rim protector ever. 

So thank you! 

In 2010, I chased a dream – to create universal, premium fitting products. Made right here, America. – Since that dream, I have been humbled by the success and appreciation from our amazing customers. 100s of product variations and invaluable relationships through that dream. I couldn’t have done it without you and my amazing team. Take this as my continued commitment to you and the products we take great pride in. Wheel Peace Of Mind, RIMiQ!

And because this isn’t a solo act, here’s our amazing team and collaborators!