Revolutionize your 35mm analog photo camera with a Digital Film Cartridge – no fake news here!
Check on Kickstarter
For over three decades, the world has held its breath, waiting for the day when the concept of a digital film roll would materialize. We’re thrilled to announce that day has arrived, and it’s all thanks to your support. But our journey is far from over, and we’re counting on you to help us take the final leap.
Our current phase is a pivotal one – we’ve already produced the first functional PCBAs (Printed Circuit Board Assemblies) and device design prototypes, a significant milestone that propels us very close to our dream. But to make this dream a widespread reality, we need your support.
How to Install the I’m Back® Film for all cameras
How to Install the I’m Back® Film, only for Leica M series:
Our story began back in 2016 when we unveiled our first handcrafted version, painstakingly programmed by none other than myself, Samuel Mello Medeiros. Progressing to the PRO version in 2018 marked a turning point for us ( me and my partner co-founder Filippo Nishino) – our initial foray into larger-scale production. We’ve embraced the lessons learned from our previous endeavors, and even in the face of a global pandemic, we survived!
In 2020, as the world grappled with an unprecedented global pandemic, we faced a challenge like no other. Yet, this adversity only served to strengthen us. We harnessed the lessons learned from our past endeavors and, undeterred by the hurdles, we pushed forward with unwavering determination. It was during this tumultuous time that we launched a triumphant campaign, rallying the support of backers who shared our vision. Against all odds, we accomplished our goals, bringing to live I’m Back®35 to propel now our dream forward.
Now, in 2023, we stand on the cusp of a milestone year in the making – a testament to our dedication and the unyielding spirit of the community that has rallied behind us. After years of meticulous planning and the collective desire to preserve the magic of vintage cameras, we proudly present the I’m Back® Film – the ultimate bridge between analog nostalgia and digital innovation.
How to center the sensor for different cameras?
To adjust the sensor to the correct position, simply slide it to the left or right. This way, the sensor will always be centered in the camera’s viewfinder. The hole’s placement is standardized in most cameras, making it easy to adjust, and this flexibility allows it to be used with many, if not all, camera models
PS: Image of our prototype.
The sensor: Small but great! 😉
I’m Back® Film, with its micro 4/3 sensor combined to our wide-angle adapter eliminates all crop factor and results in full-frame pictures!
The IMX269AQR1-D is a CMOS image sensor with a Type 4/3 diagonal size, measuring approximately 21.77 mm. It features an active pixel design with a square pixel array and offers an effective pixel count of 21.27 million pixels. This sensor is equipped with a PGA (Programmable Gain Amplifier) circuit that can provide a maximum gain of 24 dB and a 12-bit A/D (Analog-to-Digital) converter.
One notable feature of this sensor is its 12-bit digital output capability, which enables it to efficiently read out signals from its 21.27 million effective pixels at a high-speed rate of 27.27 frames per second in still picture mode.
No crop? The simple solution:
“One of the solutions you can consider to minimize the cropping effect in your photos is acquiring a lens that works for both macro photography and widening the field of view of your camera. Let me illustrate this with some examples so you can see the substantial difference it makes.
“Our frontal wide-angle adapter“
Results using regular 35mm lenses (full-frame) with our front wide-angle adapter.
By using a lens that enhances your field of view, you effectively reduce the cropping in your photos. For instance, if you own a 50mm lens, you can use it economically across various cameras. This versatile approach not only helps you capture the desired shots but is also cost-effective as you can use the same lens on different camera bodies.
How to view the area you can photograph?
Similar to the old Kodak™ DCS* model, we will provide a semi-transparent rectangle that will show you exactly the area you should frame to take your photo. This will help you have a precise view and capture images as desired.
Test with 50mm Nikkor lens:
Conclusion: I’m Back® Film results in full-frame pictures with no crop factor!
Music; www.bensoud.com
- Processor: NT9853X
- Sensor: Sony IMX 269 Micro 4/3 – 20mpx
- LCD: 1.5 inch
- Display: 240*RGB*320 LCDVideo format: 4K 3840*2160/60FPS – 4K 3840*2160/30Fps
- Video format: MP4
- Photo resolution: 20M
- Photo format: RAW, JPEG Color, preset B&W, preset Kodachrome®, preset Fujifilm®,
- Voice Commander
- Memory: SD Class 1 Max 256G
- Microphone: Internal microphone and external connectivity output.
- Speaker: Built-in
- Frequency: 50Hz/60Hz
- Power interface 7.4V – 1A
- Battery: 7.4v lithium battery
- Type C – HDMI – TF card
- WiFi connection for transferring data to your Smartphones/tablets and for live-view pictures and videos
- System requirements: Windows 2000/XP/Vista/Windows7, MAC OSX 10.3.6 and above
APP – I’m Back®
To facilitate transferring your photos from your analog camera to your smartphone, you can easily download our app. Simply connect your smartphone to our I’m Back® Film, which is user-friendly and available for both Apple iOS (iPhone) and Android devices.
“Intuitive touchscreen – menu easy and quick selection”
“Software in development. Images for illustration purposes only.”
Old version I’m Back®35 vs the new Version I’m Back® Film
Our journey took us to China, where we sought out the cream of the crop in Shenzhen’s supplier landscape. With unwavering focus, we’ve meticulously crafted every aspect – from plastic and metal components to the intricacies of PCBAs, firmware, software, and packaging.
Our premium product will be meticulously crafted with high-quality plastic and top-tier metal components. This winning combination ensures unmatched durability and performance, making it a standout choice. Your experience with I’m Back® Film will blend resilience and excellence.
Mechanical design
The final design has been completed and meticulously overseen during the two months I spent in Shenzhen. We’ll be making minor adjustments and conducting assembly checks once the PCBA is finalized in October, as planned.
PCBA design, hardware, firmware and software
We will keep you updated on each progress of our project. The SMD samples of the PCBA are completed, and we will continue to share the production status of the hardware here. Our current estimate is to have the firmware and software completed by December 2023, allowing us, after the usual debuging phase, to proceed with mass production in March 2024.
High quality packaging
Thanks to the selection of quality assured materials and suppliers, our packaging isn’t merely an afterthought; it is the result of thorough assessment and it will be adapted for secure storage and transport, ensuring that your I’m Back® Film arrives to you in pristine condition.
I’m Back® Film Packaging
