AI-powered detection, built-in eSIM 4G, 3-channel protection, and up to 25 days of low-power parking coverage.
Check on Kickstarter
X2 NEO Introduction
AI BRAIN THAT GUARDS YOUR CAR
X2 NEO doesn't just record. It sees, feels, and decides. AI vision and a G-sensor work as one system on a 15 TOPS processor, distinguishing real threats from typical motion detection. A person walking past? Ignored. Someone lingering by your door? Recorded instantly, with the video sent to your phone before the moment is over.
AI vision spots people near your vehicle in real time. Distinguishes someone walking past from someone lingering — preventing vandalism, scratches, and staged collisions before they happen.
AI vision and a 6D gyroscope work together to monitor vibrations and physical impacts while parked. The moment contact occurs, you get an instant notification on your phone with the video, even if the camera doesn't see it coming.
Multi-layered neural networks scan everything in the frame at once, filtering out pets, shadows, traffic, and wind-blown branches before they become alerts. That matters because alert fatigue kills security products. Thirty meaningless notifications in, you turn them off, and the camera is blind. X2 NEO only alerts you when something actually matters.
X2 NEO runs 20+ AI models on the camera itself, across all three cameras at once, front, cabin, and rear. Detection happens on-device, not in the cloud. Every event from every angle is analyzed locally and encrypted end to end. Nothing leaves your camera unless you choose to share it. That control stays with you, always.
Why It's Different
An impact sensor only knows something happened after it happened. Motion detection knows something moved, but not what. X2 NEO combines both with on-device AI, so it understands what it's looking at before deciding whether to wake you up.
The Problem
Traditional dashcams are reactive recorders. They wait for impact. They can't tell a leaf from a thief. When something actually happens? The footage is trapped on an SD card — or the camera itself is gone.
Remote Live View over 4G
Open the app and watch a live 4G video feed of your car — no WiFi range limit, no SD card to pull. If something's happening, you see it instantly. Tap to speak through the camera directly.
Built-in eSIM
No physical SIM card to insert. X2 NEO has a built-in eSIM and takes just 30 seconds to set up. It works the moment you plug it in. No SIM to buy, no additional 4G kit or accessory, and no second device dangling from your windshield. No complicated pairing. Just power it on, open the app, and you’re protected in under half a minute.
At your desk, you check on the car in the driveway. Away for the weekend, you glance at the cabin to make sure everything's fine. Something feels off, you pull up all three cameras at once. Every camera streams over 4G, from anywhere.
Someone at your car? Speak to them from wherever you are, through the camera's built-in speaker and mic. Most people who approach a parked car do not expect a voice from inside it.
Or check in on your wife or kids while they're driving, hearing back through the same mic, without being in the car yourself.
X2 NEO gives you more than a GPS location. See your car's live location, follow its route on the map, and review the path it has taken. You can also see the vehicle's current speed in real time, right from your phone or desktop, without being anywhere near the car.
Whether your family is heading home, your teenager is driving across town, or your car is parked somewhere unfamiliar, you can check its location, route, and speed at a glance.
See X2 NEO in Action
Smarter Parking Protection
Go on next vacation with peace of mind while X2 Neo protects your car that parked in airport, driveway, street or office. The moment X2 NEO confirms something is genuinely suspicious, it clips the moment, pushes an alert to your phone, and opens a live 4G feed so you can see what's happening, speak through the camera.
Most dashcams in market give you just one to three days of parking coverage before your car battery gives up.
X2 NEO is powered by revolutionary NeoPower™ technology, engineered to achieve the perfect balance between monitoring and endurance. It consumes up to 8× less power than traditional timelapse parking modes, enabling up to 25 days of continuous operation while keeping your car protected and eliminating battery anxiety.
8x less power draw buys 8x more coverage. Traditional time-lapse parking mode pulls 8W and lasts about 3 days before your car battery is at risk. X2 NEO's NeoPower™ mode pulls 1W and runs up to 25 days on the same charge.
X2 NEO records all three channels simultaneously in HDR, giving you a complete view of what happens around and inside your car. Whether you're driving, parked, or dealing with an incident, you have more than a single perspective. You have the full story from three synchronized cameras.
At night, a dashcam has to deal with darkness, headlights, streetlights, reflections, and rapidly changing exposure. X2 NEO is engineered to capture clearer, more detailed footage in low-light conditions, helping preserve the details that matter after dark.
From poorly lit streets to a car sitting outside at 2 AM, X2 NEO keeps watching when visibility drops.
Advanced AI algorithms enhance and stabilize footage in real time. Even at speed, in low light, or from a distance, plate numbers stay readable. The critical detail you need when it matters most.
Driving through a tunnel can push a camera from bright daylight into deep darkness in seconds. Then comes the reverse: a sudden transition back into intense sunlight.
X2 NEO's HDR processing balances these extreme changes in brightness, preserving more detail across highlights and shadows. That means fewer blown-out areas, fewer crushed dark areas, and a clearer view when lighting conditions change without warning.
When you need privacy, simply slide the display to physically cover the interior camera and stop cabin recording and microphone. No menus, no settings, no complicated steps. Just one quick slide gives you immediate, visible privacy protection.
Easy Installation
X2 NEO is designed for quick, flexible installation with multiple power options. Use the cigarette lighter adapter for simple plug-and-play installation, or choose the OBD power solution or hardwire kit for always-on parking protection.
X2 NEO supports OBD-II port power supply for a clean, plug-and-play installation without complicated wiring or need of technician. The OBD-II solution supports parking mode and is compatible with most vehicle brands, including many EVs.
The modular mount bracket lets you move X2 NEO between cars in seconds. Slide the camera out of one mount and into another, no adhesive to peel, no residue left behind.
Planning to use one X2 NEO across multiple vehicles? Additional mounting kits are available as an add-on.
Mobile App
Mobile App puts X2 NEO’s connected features at your fingertips. Connect to your dashcam, preview and download footage locally or remotely, check GPS location, control camera settings, view live footage, and share access with family members.
Connect your phone to X2 NEO via Bluetooth Low Energy (BLE) to activate the built-in eSIM and complete 4G setup directly through the app.
After the first pairing, your phone can automatically establish a direct connection to the dashcam’s Wi-Fi hotspot. No Wi-Fi passwords. No complicated pairing. Just get in and connect.
With Wi-Fi 6, X2 NEO supports wireless export speeds of up to 20 MB/s, making it quick and easy to transfer recorded footage directly to your smartphone or other mobile devices.
Share X2 NEO access with family members through the QROV app. Authorized users can check the vehicle, view available live footage, access recordings, and stay connected when it matters.
Built to Last
X2 NEO combines a sleek, refined form with a premium metallic finish and precision-engineered mechanical mechanisms. Every detail is designed to feel solid, intuitive, and dependable while standing up to changing weather and demanding in-car conditions.
X2 NEO uses a supercapacitor power system engineered for greater durability in demanding automotive environments. Unlike conventional battery-based designs, the supercapacitor is built to withstand repeated temperature changes while supporting reliable operation over time.
X2 NEO combines a nano-carbon heatsink with an optimized internal airflow design to efficiently manage heat and maintain stable performance in demanding conditions.
Operating temperature: -20°C to 70°C
Storage temperature: -30°C to 80°C
From freezing winter conditions to extreme summer heat, X2 NEO is engineered for reliable all-season operation.
Clean finish, no visible screws. Small enough to sit behind your mirror without blocking the view, and finished well enough to belong on the dash of a car that cost six figures.
Technical Specification
We use premium materials and manufacturing processes to build a dashcam that lasts.
Every unit passes 144 individual checks before it ships. Camera modules, sensors, connectors, and housing are each verified on their own, not just as a finished assembly. Every X2 NEO that leaves our factory has already survived what your daily drive will throw at it. Vibration. Temperature swings. Power cycles. Moisture. Impact. We put every unit through the same testing it will face on your dashboard before it ever reaches your car.
